נכון לעכשיו, תעשיית ייצור הפוטו-וולטאים באירופה נמצאת בדרך להתחדשות. ג'ון לינדהל, מזכ"ל-המועצה האירופית לייצור שמש, ניתח את האתגרים וההזדמנויות העומדות בפני יצרני פוטו-וולטאים אירופאים וחקר כיצד ליצור קבוצת יעדים לשרשרת שלמה של תעשיית הפוטו-וולטאים של 100GW עד 2030. .
In 2021, Meyer Burger's 400MW solar module line was officially launched. By 2022, its battery line will expand to 1.4GW, and its module line will expand to 1GW. The final annual production target is 5GW.
While Europe remains one of the world's largest PV installation markets, its once-booming PV manufacturing industry was stalled about a decade ago by rapidly rising Asian rivals.
In 2021, the EU reached an agreement on climate targets to cut net carbon emissions by 55 percent by 2030. At the same time, with the continuous improvement of the level of solar energy utilization and the increasingly prominent issue of sustainable development, in the past few years, the call for reviving the EU's photovoltaic manufacturing capacity has become more and more loud. Perhaps, 2022 will give the answer.
In April last year, the European Solar Manufacturing Council (ESMC) said that at least 75 percent of Europe's PV demand should be produced in Europe. However, according to data released by the Fraunhofer Institute for Solar Energy Systems (ISE) in its 2021 Photovoltaic Report, although European polysilicon production capacity is 22.1GW in 2020, solar wafer production capacity is only 1.25GW, and solar cell production capacity is only 1.25GW. It is 650MW, and the solar module capacity is 6.75GW. Therefore, there is still a long way to go to realize the revival of the EU photovoltaic manufacturing industry.
להלן ניתוח של יוהאן לינדהל, מזכ"ל המועצה האירופית לייצור שמש ESMC, על המצב הנוכחי של התפתחות ה-PV באירופה, האתגרים וההזדמנויות העומדות בפני יצרני PV, וזיהה תוכניות להשגת קיבולת -GW.
1. אתגר:
1) China's intangible and extensive grants, loans, credits and tax support;
2) תמיכת מענק ברורה ונרחבת מארה"ב והודו;
3) הפריסה של טכנולוגיית חדשנות פוטו-וולטאית של האיחוד האירופי בשוק המקומי מוגבלת, וזכויות קניין רוחני ופטנטים אינם מוגנים כראוי בשוק החיצוני של האיחוד האירופי;
4) תקני הייצור והעבודה הפוטו-וולטאיים האירופיים מחמירים, אך אין תקן מקביל בשוק החיצוני של האיחוד האירופי;
5) תמחור מודול PV ובעיות שרשרת אספקה גבוהות יותר הן בעיה מבנית.
2. הזדמנויות:
1) European PV industry production becomes cost-competitive. The price difference between European and Asian products has narrowed due to the current significant increase in production and shipping costs and delivery times for Asian products. For European PV manufacturing to be price-competitive, two conditions must exist, namely GW-scale manufacturing capacity; and a complete European manufacturing value chain. The EU needs to keep the value chain intact to meet at least part of our needs that don't need to be imported, despite the fact that imports are of course still an important factor.
2) אירופה עדיין מובילה בחדשנות טכנולוגית PV, אבל רק אם בסיס הייצור התעשייתי עדיין קיים. טכנולוגיית המשטח האחורי של תא סולארי (Al BSF) המסורתית היא בעלת יעילות המרה של 18-22 אחוז והיא מוחלפת כעת בטכנולוגיית PERC וטכנולוגיית האבולוציה שלה, המאפשרת יעילות של תאים סולאריים להגיע ל-20{{6} }24 אחוז, בעוד שדרוג קו הייצור עלות בינונית. בהתבסס על טכנולוגיית הטרוג'נקציה (HJT) או TOPCon, הדור השלישי של תאים פוטו-וולטאיים בעלי יעילות גבוהה- ישיג יעילות של 23-26 אחוזים. נכון לעכשיו, עלות הייצור שלו זהה לזו של תאי PERC, שניהם ב-20-30 סנט/Wp. סוללות ביעילות גבוהה מאפשרות עלות תחרותית או אפילו נמוכה יותר של ייצור חשמל גם עם מחירי רכיבים גבוהים יותר. בעתיד, עשויים להיות שיפורים טכנולוגיים נוספים, כגון תאי טנדם פרוסקיט-סיליקון עם יעילות העולה על 30 אחוז. ההתקדמות הטכנולוגית הזו עדיין מובילה את הדרך באירופה, וסוללת את הדרך לפריסה עולמית של PV בקנה מידה טרוואט.
3) הוקמה מסגרת מדיניות הפיתוח-ארוכת הטווח עבור אנרגיה מתחדשת באירופה. העסקה הירוקה האירופי וגל החדשנות בנו ביטחון למשקיעים וליזמים.
4) The emergence of sustainable, carbon-neutral eco-design concepts and specific standards under consideration, including recently announced measures to address distortions in foreign subsidies in the EU market, are the driving force behind the EU's transition to a green and innovative energy system and economy. Growing customer concerns about carbon footprints will have a structural impact on PV manufacturing. Compared to current Asian products, using PV modules produced in Europe reduces carbon consumption, avoids long-distance transportation, and better eco-design parameters. The importance of this aspect will increase over the next few years.
5) שיטות פריסה חדשות המשלבות מושגים פוטו-וולטאיים במערכות משולבות מאפשרות לייצור פוטו-וולטאים באירופה לממש יתרון תחרותי פוטנציאלי. פתרונות חדשניים שונים מפותחים וגדלים במהירות בתחומים שונים, לרבות Building Plus Photovoltaic (BIPV), Vehicle Plus Photovoltaic (VIPV), Floating Body Plus Photovoltaic (FPV) ו- Agriculture Plus Photovoltaic (APV). יצרני PV אירופיים יכולים ליהנות מצרכים אירופאיים ומקומיים ספציפיים, שכן מערכות משולבות דורשות פתרונות אישיים יותר.
3. שיעור כושר הייצור העולמי של התעשייה הפוטו-וולטאית האירופית בכל חוליה בשרשרת התעשייה בשנת 2020 הוא כדלקמן:
1. 11 אחוז מייצור סיליקון PV העולמי: קיבולת של 22.1GW (Elkem ו-Wacker)
2. אחוז אחד מהייצור העולמי של פרוסות שמש סיליקון PV: קיבולת של 1.25GW (Norsun, Norwegian Crystals ו-EDF Photowatt)
3. 0.4 אחוז מהייצור העולמי של תאי סיליקון פוטו-וולטאיים: 0 קיבולת .65GW (Solitek/Valoe, Enel, Ecosolifer)
4. 3 אחוז מייצור המודול העולמי: קיבולת של 6.75GW (29 חברות שונות)
5. 25 אחוז מתפוקת המהפך.
In the above scenario, Europe's installed PV capacity in 2020 accounts for 15 percent of the global total. Therefore, if Europe wants to become self-reliant, it needs to step up the production of wafers, cells and modules.
Currently, Europe has a very negative trade deficit in photovoltaic cells and modules. The table below shows the total value of import and export trade of photosensitive semiconductor devices (including photovoltaic cells assembled into modules or panels) and light-emitting diodes in Europe.
与此原文有关的更多信息要查看其他翻译信息,您必须输入相应原文
发送反